Table of Contents  MOBOTIX Online Help

Image Sensor Configuration

Table of Contents
Image Sensor Configuration
Store Configuration

Open the Image Sensor Configuration dialog (only available on dual cameras) to configure the image sensors of the camera that are to be used for the right and the left camera image. The MOBOTIX cameras M15, S15D, S15M and V15 are automatically listing the installed or attached sensor modules.

Selectable Sensor Modules for MOBOTIX M15 S15D, S15M and V15

The MxDigitizer is an analog digital converter and allows using analog cameras with an S15D or an S15M. For the camera, the device behaves like a regular sensor module.

On D15 models with 6MP image sensors, you can also set the type of lens carrier if a different one than the factory default setting has been installed. For example, if a camera had been delivered as 180° model ("Panorama"), you can later install separate lens units.



If you have installed different lenses, make sure that you are selecting these lenses in the Lens Configuration dialog, so that the lens correction works properly.

Store Configuration

Click on the Set button to permanently accept this setting. In order to enable these settings, you need to reboot the camera.

© 2001-2024 MOBOTIX ·